Model
576P-20
Series
576P
Feature / Application
The model 576P is a high-level signal output piezoelectric accelerometer designed specifically for measuring high temperature vibration on structures and test purpose. Theunit is hermetically sealed and ideal for use in extremeenvironments. This sensor is the industry standard forvibration/shock accelerometers. In addition to adhesivemounting, 576P has Ø4.1 through holes for screw mountingon the test object. The accelerometer is a self-generatingdevice that requires no external power source for operation. Model 576P operating in annular shear mode. Thesespecially designed crystals exhibit low base strain sensitivity,high resonance frequency, and excellent output stability over time. Signal ground is connected to the outer case of the unit.The accelerometer features a 10-32 side connector andrequires a low-noise coaxial cable for error-free operation. Senther’s model 11P-3 is a 10-32 to BNC breakout low noisecable for the sensor.
•Through hole mount •Side connector output •Adhesive or screw mounting •Hermetic seal •Annular shear mode •Wide frequency response •Wide temperature range •Safety wire hole available
•Engine research •Shock testing •Modal analysis •Aircraft testing •Auto exhaust system
| Range(g) | 2000 |
| Velocity Range(in/s) | / |
| Sensitivity( ±10%) | 20 |
| Frequency Range(Hz) | 0.5-15000 (±3dB） |
| Weight(g) | 28 |
| Shock Limit | 5000 |
| Operation Temp(°C) | -55~260 |
| Output Type | electric charge |
| Axial | single-axis |
| Mounting | Through hole mount |
| Temp.Signal | / |
| Sensor Type | PE |
| Sens. Unit | pC/g |
| Excitation | / |
| Mating cable | 10P、11P |